Product Type – Soundproofing Accessories

Styccobond B95 is a high performance, one part, flexible, moisture curing polyurethane adhesive used for installing a wide range of wood floor coverings. It is non-flammable and is quick setting to develop a high bond strength. It is protected against bio-degradation and is suitable for use over normal underfloor heating.

• Styccobond B95 is used for bonding timber / laminate floor coverings over MuteMat® OSF.
• 15KG tub, coverage estimate of 18.75m2 using a 3mm x 6mm notch trowel
• Suitable for use with MuteMat® OSF and wooden / laminate floor coverings
• Suitable for use over normal underfloor heating installations
• High strength and flexible

Please refer to F.Ball and Co. LTD literature for full adhesive information.

Styccobond F46 is a solvent free pressure sensitive acrylic adhesive that dries to a permanent tacky film. It is used to reduce the incidence of trowel serrations shadowing through thin vinyl flooring and is designed to give strong initial tack and a high bond strength. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.

• Styccobond F46 is used for bonding vinyl finishes o MuteMat® OSF
• Styccobond F46 can also be used to bond MuteMat® OSF to non-absorbent substrates such as self-levelling resin compounds.
• 15L tub, coverage estimate of 75m2 using a 1.5mm x 5mm notch trowel
• Suitable for use with MuteMat® OSF and vinyl floor coverings
• Suitable for use over normal underfloor heating installations
• High strength
• Excellent plasticiser resistance

Please refer to F.Ball and Co. LTD literature for full adhesive information.

Styccobond F3 is a water based rubber/resin flooring adhesive that has excellent wet grab with an early build up of strength. It is protected against bio-degradation and is suitable to use over normal underfloor heating installations.

Styccobond F3 is used in conjunction with our MuteMat® OSF range when adhering to absorbent substrates.

If anhydrite screed has been laid, the laitance must be cleared before applying any adhesive.

Styccobond F3 can also be used to adhere woven carpets to MuteMat® OSF.

• 15L tub, coverage estimate of 45m2 using a 2mm x 6mm notch trowel
• Suitable for use with MuteMat® OSF
• Suitable for use over normal underfloor heating installations
  High strength

Please refer to F.Ball and Co. LTD literature for full adhesive information.

Paracol PUD4 Adhesive is used to bond the tongue and groove join of our Versafloor 18mm to ensure an airtight seal and increased stability. This is a vital adhesive when creating a floating floor construction, one that uses little to no mechanical screws.

• 750g tub
• Covers approximately 20 x Versafloor® 18mm joins depending on the generosity of application
• Water Resistant
• Processing temperature minimum of 10 degrees

Adhesive 15kg tub is used in conjunction with our MuteMat® range when applying to timber surfaces, and for applying timber over boards for the use of MuteMat® 2, MuteMat® 3 and MuteBarrier™ range, and to where any requires a timber over boarding.

Although adhesives do not directly improve the soundproofing performance, it does prevent the bowing of timber that could cause a ‘slapping’ effect on the flooring. It also prevents any movement in the flooring that could lead to cracking of fragile joins in timber finishes on the tongue-and-groove fitting and tearing of any vinyl.

• 15kg tub, coverage estimate of 30m2 using a 3mm notched trowel.
• Suitable for use with Mass-Loaded Vinyl and Rubber and Foam materials bonding to timber, these include our MuteMat
• Solvent-free, non-staining with no toxic substances
• Non-flammable

Perimeter Flanking Band – FB8 is an absolute essential in floor soundproofing systems and one that is often overlooked. Perimeter Flanking Bands are to line the perimeter of any room that is using rigid materials that would come into contact with the walls. It acts as a buffer, one that reduces Flanking Transmission, by creating a barrier between floor and wall. It is to be installed along with any installation of a new subfloor in timber builds, even if you plan to install a woven carpet. It is for when you are installing any hard floor finish such as the examples below. These are because a timber overboard is required with some of our flooring options.

• Engineered wood
• Laminate
• Luxury vinyl tile
• Vinyl
• Ceramics

Screeding also benefits from the use of a Flanking Band as it helps to decouple the new floating screed from being in immediate contact with the walls.

Information

• 8mm x 150mm x 50m
• Vital decoupling for flooring systems to separate floor and wall
• Suitable for concrete screeding applications, and when installing hard floor finishes
• Also suitable for timber structures when installing a new subfloor, and when installing hard floor finishes
• Closed cell foam structure
• Plastic apron to keep an airtight seal with adhesive