MuteMat® OSF 750-03
Performance: Up to 19dB reduction for impact*
Dimensions: 1.3m x 20m x 3mm (26m2)
Weight: 60kg
For: Great and small scale residential and commercial projects looking for soundproof over screed.
Compliance: Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland).*
Installation: Please see the installation tab below.
Where: Floor application only, suitable for a wide range of floor finishes that include laminate, engineered wood and luxury vinyl tiles.
The thinnest over screed underlay specialised for concrete structures but can also be used in timber when thin solutions are required.
More Information
MuteMat® OSF 750-03 for Part E Building Regulations Compliance
Achieving good levels of Sound Insulation to ensure you pass your sound test and achieve Part E compliance can seem a daunting task. We have put together a myriad of commonly used soundproofing wall and soundproofing floor solutions, with the simple aim of achieving passing your Part E sound test. We have selected a range of products which we have tested frequently and are confident in their onsite performance. So look no further your sound testing, acoustic design and product supplier is looking right at you.
MuteMat® OSF 750-03 is the highly effective and slimmest resilient layer available for managing the reduction of impact noise in over screed concrete constructions. Its recycled rubber-mix content is refined from over 14 tires for each roll, helping to reduce the impact on the planets ever-growing carbon footprint. It’s density, resulting in minimal compression is a key component to providing a robust flooring even when it is subjected to high loads, giving you a long lasting and effective solution that can receive a wide range of floor finishes, with no requirement for an overlay, this includes delicate flooring finishes such as ceramic tiling. If you are seeking soundproofing materials for Timber constructions or looking to achieve even greater impact reduction, we would recommend our MuteMat® 2 or MuteMat® 3 for reduction of both airborne and impact noises.
Information
- 1.3m x 20m x 3mm (26m2)
Specialised for retrofit installation. - Suitable for concrete structures to effectively attenuate impact noise.
- Can be installed under a wide range of floor finishes, with no requirement of an overlay.
- A guaranteed consistent thickness and density.
- Does not deform, maintains efficiency long term including under heavy loads.
Pre-fabricated recycled tire granule mat. - Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland) and Building Standards Technical Handbook 2017 for Scotland for impact transmission.
FAQs
When sound proofing timber sub-floors (this is a ply or MDF layer fixed to the joists) a compressible sound insulation material would is best used for the reduction of impact noise, MuteMat® OSF 750-03 would not offer soundproofing against footsteps, moving of furniture or household goods including washing machines and dishwashers in timber constructions because of its density – it’s properties make it perfect for use in concrete structures.
Take a look at MuteMat® 2 or MuteMat® 3 for floor soundproofing in timber structures.
Installation Guide
MuteMat® OSF 750-03 to concrete/screed substrate, prime the substrate first with roller coat of ARDEX P82, allow to cure, then bond MuteMat® OSF 750-03 using either ARDEX S 28 or ARDEX X 7001 Mictrotec.
If bonding MuteMat® OSF 750-03 to a timber substrate, Ardex AF200 should be used.
When you come to lay the tiles, you should prime MuteMat® OSF 750-03 with ARDEX P82, then bed the tile into either ARDEX S28 or ARDEX X 7001 Microtec.
Flexi grout should be considered
Sound insulation advice for Part E
Soundproofing Walls
