Coronavirus Update - NOVA Acoustics Ltd remains open for business during this uncertain time following the COVID-19 outbreak.  All Government advice and recommendations are being followed by our staff and site engineers.  

×
×
×

Styccobond F3 Adhesive

£59.00 (Excluding VAT)

£70.80 (Including VAT)

Why Choose Styccobond F3 Adhesive

Covers: up to 45m2 with a 2mm x 6mm trowel

Weight: 15kg.

For: homes, workplaces, industrial developments, and specialist audio environments.

Compliance: Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland).*

Installation: to be used with all over screed adhesive applications please see our 'Install' tab below.



Styccobond F3 is a water based rubber/resin flooring adhesive that has excellent wet grab with an early build up of strength. It is protected against bio-degradation and is suitable to use over normal underfloor heating installations.

Styccobond F3 is used in conjunction with our MuteMat® OSF range when adhering to absorbent substrates.

If anhydrite screed has been laid, the laitance must be cleared before applying any adhesive.

Styccobond F3  can also be used to adhere woven carpets to MuteMat® OSF.

  • 15L tub, coverage estimate of 45m2 using a 2mm x 6mm notch trowel
  • Suitable for use with MuteMat® OSF
  • Suitable for use over normal underfloor heating installations
  • High strength

 

Please refer to F.Ball and Co. LTD literature for full adhesive information.



Styccobond F3 adhesive for installation of our MuteMat® OSF range to absorbent substrates, and although adhesive does not provide any immediate soundproofing benefit, its role in the system is still important. When you install a wooden flooring for example or composite flooring, made up of many layers, moisture over time will begin to warp the flooring. When the flooring warps it lends itself to 'slapping' against the flooring, causing a form of impact noise that is difficult to reduce without replacing. Adhesive helps to reduce this warping and to keep all composite levels in-check and to satisfy Building Control requirements.

Sound Insulation Advice for Part E

Soundproofing Floors

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Walls

To help developers, architects and builders specify the correct products to achieve the...

Flanking Design & Detailing

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Suppliers

To ensure you achieve the requirements of Part E of the Building Regulations the materi...