Coronavirus Update - NOVA Acoustics Ltd remains open for business during this uncertain time following the COVID-19 outbreak.  All Government advice and recommendations are being followed by our staff and site engineers.  

×
×
×

Knauf RS60 50mm

£30.00 (Excluding VAT)

£36.00 (Including VAT)

We are not currently accepting purchases online, please send your purchase request to info@novaacoustics.co.uk

Why Choose Knauf RS60 50mm

Performance: will vary due to featuring in acoustic systems.*

Dimensions: 1200mm x 600mm x 50mm.

Weight: 20kg

For: homes and workplaces.

Compliance: Compliant with Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland).*

Installation: will vary depending on which system it features.

Where: for all cavities found between floor joists, stud frame walls and ceilings. Also in conjunction with acoustic cradles such as MuteCradle™ 45/60mm.

Universally recognised throughout the world of soundproofing, commonly used as part of an acoustic system, or combined with additional acoustic materials such as our MuteClip®.

There is currently a shortage on Rockwool RW3, RWA45, Knauf RS60 and RS45 within the UK, please do contact do office before orders so we can indicate stock availability


Specialist Acoustic Mineral Wool for Part E Building Regulations Compliance

Knauf Acoustic Mineral Wool (RS60) (60kg per m3) is high-density acoustic mineral wool that is used to treat the open spaces, or cavities, between flooring joists, stud-frame walls and battened ceilings. As Acoustic Mineral Wool is a fibrous material, it helps to lessen sound energy by turning it into heat, helping to decrease the remaining noise 'bouncing' around inside the cavity and amplifying. As a standalone product, it is only effective against very light background noise issues. We recommend Knauf Acoustic Mineral Wool to be used as part of a system when a cavity is created or existing. 

Acoustic Mineral Wool will also help to prevent Flanking Transmission adjacent cavities. Any soundproofing system fitted without this material will not achieve its complete acoustic performance and may fall short of expectations or essential acoustic regulations.

Acoustic Mineral Wool has a greater density than thermal wool, and this is evident in their slab appearance. The reduction as an acoustic insulation material comes as an absorptive rating NRC (Noise Reduction Coefficient) which differs for each thickness. This means that it is an absorptive material as opposed to a dense soundproofing product. You will find all acoustic systems that Acoustic Mineral Wool is featured in by selecting the 'Systems' tab above. Here you will see how vital it is!


Information

  • A crucial component for all soundproofing systems with joists, battens, acoustic cradles or stud-frames.
  • To be used in cavities to provide optimum soundproofing performance for all systems
  • Slab dimensions 1200mm x 600mm x 50mm (9 per bale - 6.48m2)
  • Other thicknesses include: 100mm, 75mm and 25mm
  • Euroclass A1 fire rating
  • Always leave an air gap to ensure full performance a minimum of 10mm
  • A 3-5 day lead time can be expected with this product, please call ahead for availability


Knauf RS60 Pack Quantities

  • 100mm 
  • 75mm 
  • 50mm 
  • 25mm
  • 4 Slabs (2.88m2) 
  • 6 Slabs (4.32m2) 
  • 9 Slabs (6.48m2) 
  • 18 Slabs (12.96m2)

Why is this Acoustic Mineral Wool 60kg, and what does the 60kg mean?

60kg is not its surface density, but the density of the product when measured in cubic meters, it is a fairly lightweight sound insulation material which is easy to cut and fit.

Where is Acoustic Mineral 50mm best used in soundproofing?

The 50mm depth is best used when treating stud frames, and between flooring joists to treat cavities, leaving them untreated can lead to the remaining sound passing through and 'bouncing around' in these areas. You will want to avoid using a thicker size than the air gap and aim to have at least a 10mm air gap on either side of the slab, for instance, using a 100mm thickness in a 50mm cavity will lead to compression of the acoustic mineral wool and a direct path of sound to travel through, degrading the effectiveness of any soundproofing system.

Can I use Acoustic Mineral Wool to soundproof a room?

Acoustic Mineral Wool is used in almost all soundproofing systems that are installed with over a new or existing framework, or suspended by our MuteClip® System and MuteCradle™ Systems. In soundproofing, you use Acoustic Mineral Wool to treat the cavities found in between frameworks and flooring joists to reduce sound from reflective around inside them. It is vital to note that this is a lightweight, fibrous material and this means that sound will pass through it. It is not so effective in reducing airborne nor impact noise issues as a standalone product.

Can Acoustic Mineral Wool be used as a sound absorption material?

Acoustic Mineral Wool is fibrous, and this means that fibres can be released into the air when exposed, which is why you place them in cavities and not to use as an exposed sound absorption panelling. We offer a vast range of sound absorption materials where you can be as creative as you like, a variety of colours and 3D structures can all tailored to your space.

What is the best method for cutting Acoustic Mineral Wool?

We have found that a bread knife usually makes for an excellent cutting tool if this is unavailable, a large pair of scissors will also work well.

Are there any allergens or toxic elements found in Acoustic Mineral Wool?

The fibrous nature of the product can lend to slight irritation of the skin. Those with sensitive skin may find a slight redness appear while installing, the use of gloves and protective eyewear is recommended.

Acoustic Mineral Wool is not listed as a toxic or hazardous material, but when installing it does release small dust particles, so we recommend the use of gloves, eye protection and protective mask.

Measure the depth of the cavity first, or if you know the stud depth you are using, make sure that you choose a depth of Acoustic Mineral Wool that allows for a 10mm air gap on either side.

The reason you leave this air gap is to avoid compressing the fibrous properties between the two partitions you are soundproofing, for example, do not use a 100mm depth in a 50mm gap.

Acoustic Mineral Wool is easy to cut with large scissors, or we found a bread knife to be a great tool here.

Cut the slab a little larger than the stud or joist gap to friction hold, or use a form of wiring to hold it in place.

Sound Insulation Advice for Part E

Soundproofing Floors

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Walls

To help developers, architects and builders specify the correct products to achieve the...

Flanking Design & Detailing

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Suppliers

To ensure you achieve the requirements of Part E of the Building Regulations the materi...