×
×
×

Impact Mat 100, 200 & 300 Acoustic Underlay

Achieve Part E Building Regulations compliance with our Acoustic Underlay and Acoustic Flooring Systems.  See our Part E Sound Insulation Design Advice for more info.


We offer product supply to 'Trade Accounts' only. Contact us to setup a trade account.

Why Choose Impact Mat 100, 200 & 300

Overall size: Impact Mat 100 1.20m x 1.0m long |Impact Mat 200 1.20m x 1.0m long|Impact Mat 300 1.20m x 12.5m roll

Resilient layer thickness: Impact Mat 100 6.5mm Isolate R|Impact Mat 200 8.0mm Isofiba/Barrier composite|Impact Mat 300 12.0mm tri-layer with Isopoli

Weight: Impact Mat 100 39kgs per roll (2.6kg/m2) |Impact Mat 200 8.0kg/m2|Impact Mat 300 12.5kg/m2  

Compliance: Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland).*

Installation: Please see our installation tab below.



Achieving good levels of Sound Insulation to ensure you pass your sound test and achieve Part E compliance can seem a daunting task. We have put together a myriad of commonly used soundproofing wall and soundproofing floor solutions, with the simple aim of achieving passing your Part E sound test. We have selected a range of products which we have tested frequently and are confident in their onsite performance. So look no further your sound testing, acoustic design and product supplier is looking right at you.

Isocheck Impact Mat acoustic flooring systems are designed for high levels of impact sound reduction through timber floors and staircases where an acoustic test is accepted for this type of system. (Not all authorities will accept a test on a soft floor covering when laid on a structural timber floor).

Isocheck Impact Mat 100 is a 6.5mm thick layer of Isolate R which will provide impact improvement. Isocheck Impact Mat 300 is a 12mm tri-layer system with an Isopoli core. Impact Mat 200 consists of an 8mm Isofiba / barrier mat composite and can be used as a single or double layer.

*When installed and accepted as part of a complete party floor construction all systems enable a timber floor to meet the sound transmission standards of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015.


Sound Insulation Advice for Part E

Soundproofing Floors

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Walls

To help developers, architects and builders specify the correct products to achieve the...

Flanking Design & Detailing

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Suppliers

To ensure you achieve the requirements of Part E of the Building Regulations the materi...