Nationwide Delivery
High Performance
Great Value
Expert Advice
Styccobond F3 Adhesive
Covers: Up to 20 x Versafloor 18mm
Weight: 750g
For: Homes, workplaces, industrial developments, and specialist audio environments.
Compliance: Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland).*
Installation: Simply remove the nozzle and apply.
Where: To be applied to tongue-and-groove joins of MuteDeck™
More Information
Paracol PUD4 Adhesive is used to bond the tongue and groove join of our Versafloor 18mm to ensure an airtight seal and increased stability. This is a vital adhesive when creating a floating floor construction, one that uses little to no mechanical screws.
- 750g tub
- Covers approximately 20 x Versafloor® 18mm joins depending on the generosity of application
- Water Resistant
- Processing temperature minimum of 10 degrees
FAQs
Versafloor® Adhesive is for use with Versafloor® 18mm, which is a cement particle board bonded together with chipboard to produce a solid and robust soundproofing platform. This adhesive will not improve acoustic performance, but will ensure the stability of the boards at their tongue-and-groove joints to create a successful floating floor And, it will also create an airtight seal. These properties attribute to both a strong performing separated system, with the reduction of air leakage, keeping in check the first two properties above.
