Acoustic consultancy and design to support RIBA design stages 2 – 6
Sound Testing for Building Regulations Northamptonshire
We provide UKAS-accredited sound insulation testing throughout Northampton and Northamptonshire, providing you with reports for your building control officer with a quick and reliable turnaround.
NOVA Acoustics Ltd provides sound and acoustic testing across Northampton & Northamptonshire. Our local knowledge and ability to respond quickly to your project requirements across Northampton & Northamptonshire is unrivalled and comes at the most competitive price. We specialise in sound testing and sound insulation design advice so give us a call to discuss your project or review our sound insulation design advice pages here to get started. Our specialist knowledge of Part E of the Building Regulations and the unique needs of our local clients means that we are still Northampton & Northamptonshire’s most popular choice for sound testing.
Our efficient sound insulation testing protocols fully comply with Part E of the Building Regulations for England and Wales. Our years of experience mean that your project will be expertly dealt with from start to finish by our expert team of acoustic consultants. You can rest assured that you are in safe hands as we are UKAS Accredited Testing Laboratory No. 8568 for Sound Testing.
What is sound insulation testing?
Sound testing is a vital part of complying with Part E of the Building Regulations, as it ensures that residential development can demonstrate acceptable levels of noise attenuation performance. This includes airborne (noise transmitted through the air, such as a conversation between people) and impact noise (noise resulting from an impact on the surface, such as footsteps on the floor).
Essentially, sound insulation testing assesses if the dwelling provides a reasonable resistance to the passage of sound.
What is involved in Part E sound testing?
Part E of the Building Regulations requires that walls and floors be sound tested between adjoining dwellings to ensure that they meet Part E regulations for acceptable amounts of sound transference. For a typical small development (under 10 dwellings with similar construction), you would typically need:
- 2 airborne wall sound tests
- 2 airborne floor sound tests
- 2 impact floor sound tests
The Cost of Sound Insulation Testing
Through our extensive network of engineers, we can offer highly competitive pricing without compromising on quality.
For personalised quote, please get in touch.
Installing new hard floor finishes in a residential dwelling?
If you’re installing or altering hard or wooden flooring in a leased residential dwelling, check that your lease allows you to. It is very common for residential leases to contain clauses that restrict alterations to floor finishes, this is normally where carpeted flooring is in place but this also applies to where hard or wooden floor finishes are being altered as well.
The wording of the clauses vary substantially so firstly it is important that the wording of the clause is reviewed to ensure it is fully understood what is required. Normally, the clauses will state that the sound insulation of the new floors is required to provide the same resistance to sound as the existing floor.
Most conditions require sound testing before work commencing to ascertain the existing performance, consultation with an acoustic consultant and a robust acoustic design for the floor being prepared and then post-completion sound testing to ensure the desired sound reduction has been achieved.
It is very challenging to ensure that an existing carpeted floor performs at the same standard as a proposed hard or wooden floor and as such detailed acoustic design and great care are required to ensure compliance with the clause of the lease. We have assisted hundreds of clients in navigating these types of clauses, so please get in touch if you need help.
Sound Testing FAQs
When should pre-completion airborne and impact sound insulation tests be performed?
Pre-completion sound testing should be carried out when the building is nearly finished, but before decorative finishes are applied. This is usually after installing all doors and windows but before adding carpets.
Why do I need a sound insulation test for Part E of the Building Regulations?
Part E of the Building Regulations in the UK focuses on resistance to the passage of sound within and between buildings. A sound insulation test is required under Part E to ensure that the construction of a building, particularly its walls and floors, meets the specified acoustic performance standards. The primary goal is to minimise the transmission of airborne and impact sound between different spaces, promoting a suitable level of acoustic comfort for occupants.
How is sound testing completed?
Sound insulation testing for Approved Document E of the Building Regulations is carried out following the procedures outlined in the relevant British Standard, which is BS EN ISO 140-4:1998 for airborne sound insulation and BS EN ISO 140-7:1998 for impact sound insulation.
Test Procedure:
Airborne Sound Tests: A loudspeaker emits pink noise in the source room, and sound levels are measured in both the source and receiver rooms.
Impact Sound Tests: A tapping machine simulates impact noise, and sound levels are measured in the receiver room. We use an advanced noise monitoring system to ensure accurate results.
Measurements: The measurements are taken in decibels (dB) and recorded for each test point. Results are compared against the specified performance standards outlined in Approved Document E.
Reporting: A detailed report is generated, indicating the performance of each tested partition and whether it meets the required standards. If any failures are identified, recommendations for improvements are provided.
When should my development be sound tested?
We strongly advise that you get in touch with us at the earliest possible stage for your development to have the best possible chance of passing its sound test. However, there are certain minimum requirements in the process of development that will impact our ability to perform sound insulation testing and the likelihood of a development passing. Some general requirements for improving the chances of passing sound testing include:
1. Windows & external doors must be installed, glazed and closed
2. Ventilation systems should be installed and closed
3. Internal doors should be hung
4. Walls, floors and ceilings must be completed
5. Skirting boards, electrical sockets and light switches should be fitted
6. To test Impact sound transmission, there must be no cosmetic flooring fitted
7. Rooms in which testing is to be carried out should be empty and tidy
8. No trades should be working in the dwelling during the acoustic test
9. Access to the properties on both sides of the separating partition is required
10. There must be no noisy operations around the test properties during acoustic testing
11. 240v (50Hz) mains power is required within the dwellings
How much does sound insulation testing cost?
Testing costs will ultimately depend on the overall size of the development. We pride ourselves on our expert and acclaimed service, which includes honesty and transparency with all costs associated with sound insulation testing.
This means that sound testing is broken down into two simple areas:
One-off site fee: Covers costs for expert engineers, equipment and reporting
Per-test fee: Based on the number of sound insulation tests required
We also provide impressive savings for bulk testing of multiple developments, as well as discounts for returning clients. Many clients combine sound testing with our sound insulation design services to assure a pass.
Our unrivalled service includes a range of free sound insulation design details for helping properties achieve the required levels of sound attenuation.
We also charge a fee for developments that require re-testing. Simply use the contact form on this page, or call our offices, to chat about your specific sound insulation testing requirements with our friendly and knowledgeable expert acoustic consultants.
When should pre-completion sound testing be carried out?
Pre-completion sound testing should be carried out at a stage in the construction process when the building is essentially complete but before the application of decorative finishes. This typically means after the installation of all internal and external doors and windows, but before carpets, curtains, and other finishing materials are added.
How long does sound insulation testing take?
The duration of sound insulation testing can vary based on the size and complexity of the building, as well as the number of individual tests required. In general, the testing process itself may take several hours to a full day, depending on factors such as the number of test points and the type of tests being conducted (airborne sound tests or impact sound tests).
Who should carry out Sound Insulation Testing for Approved Document E?
Approved Document E states that sound insulation testing should be carried out by a test body with appropriate third-party accreditation. Test bodies conducting testing should preferably have UKAS accreditation (or European equivalent) for field measurements. The DCLG also regards members of the ANC registration scheme as suitably qualified to carry out pre-completion sound testing. Our sound testing engineers align with all standards and we guarantee a professional service.
What is a Flanking Transmission?
Flanking sound (or flanking noise) is sound that transmits between spaces indirectly, going over or around, rather than directly through the main separating element. This can allow sound to transmit between spaces even though the main separating element itself provides good acoustic insulation.
Approved document E: Resistance to the passage of sound, defines ‘flanking transmission’ as, ‘Sound transmitted between rooms via flanking elements instead of directly through separating elements or along any path other than the direct path’.
It defines a ‘flanking element’ as, ‘Any building element that contributes to sound transmission between rooms in a building that is not a separating floor or separating wall’. A common example of flanking is sound transmitted between two spaces through a floor void (or even a floating screed) that runs under the separating partition, even though the partition provides good acoustic insulation preventing the direct transmission of sound. Flanking can result from both impact sounds and airborne sounds. Any building element that penetrates or circumnavigates a separating element can result in flanking. This might include:
Windows and doors.
Flanking ceilings, floors and walls that continue past the separating element into the adjoining space.
Voids such as wall cavities, suspended ceilings and raised floors.
Penetrating joists.
Corridors and other circulation spaces.
Ductwork and pipework.
Sockets.
Poor workmanship.
Flanking should be considered early in the design stage of new developments and detailing should eliminate or minimise the inadvertent downgrading of sound insulation. Junctions between elements in particular can offer a potential flanking route if they are not carefully detailed and constructed. Good briefing, supervision and inspection on-site can help to ensure that the quality of workmanship remains high so that details are constructed as designed.
Flanking can be a particular issue where adjoining spaces have different uses, such as; a living room next to a bedroom, or between neighbouring houses with different patterns of occupancy and behaviour. Flanking can be difficult to treat in older buildings, where the addition of sound insulation to one element simply reveals a flanking path through another.
Approved document E of the building regulations: Resistance to the passage of sound, sets out requirements for sound insulation between spaces and guides how to detail separating elements to avoid flanking.
What is the process for Licence to Alter Sound InsulationTesting?
We will follow the following process:
Lease Review – We will first need to review the lease, clarify the wording, and present an action plan based on the minimum you require to achieve compliance.
Baseline Sound Testing – The most important sound test is the pre-works sound insulation test to ascertain the existing level of resistance to sound. This test will need to include your current floor finish. To conduct this test we will need access to your neighbour’s flat below for approximately 3 – 4 hours.
Acoustic Design Review – We will analyse the sound test results, and existing construction details of the floor and we will review your proposed floor specification. We will present a robust acoustic flooring solution including installation instructions to meet the requirements of the lease. The acoustic design review is imperative to ensure you install the correct products and that they are installed correctly to achieve the right performance level and we strongly advise it is included in the package.
Post–Completion Sound Testing – When the new flooring is installed if required by the lease, we will conduct a completion test to evidence that the lease requirements have been met. We will provide a technical test report to provide to your management agent.
We also provide acoustic underlay at very competitive prices, check out our range of acoustic underlays and acoustic floating floors.
What happens if I fail the Sound Test?
Has your building failed a sound insulation test? This means the acoustic performance of the constructed elements (such as walls and floors) does not meet the specified standards outlined in the building regulations, such as Approved Document E in the UK. Failing a sound test has several implications, and it typically triggers a series of actions and considerations:
Investigation and Analysis: Work with us to investigate the reasons for the failure. This may involve a detailed analysis of construction details, materials used, and potential flanking paths for sound transmission.
Corrective Measures: Implement corrective measures to address the identified issues. This could involve improving the installation of doors and windows, sealing gaps, using better insulation materials, or making modifications to construction details.
Retesting: After implementing corrective measures, arrange for a retest to verify that the necessary improvements have been made. Retesting is crucial to ensure that the building now meets the required sound insulation standards.
Submission of Results: Submit the revised test results, along with documentation of the corrective measures taken, to the building control authority. The revised results should demonstrate compliance with the required standards.
Building Control Decision: Building control authorities will review the new test results and documentation. If the revised results demonstrate compliance, the building control authority may issue the necessary certificates or approvals.
Which Sound Testing Company should you choose?
You should ensure you select a company with appropriate third-party accreditations. You should look out for Sound Testing Companies that hold UKAS or ANC Accreditation. Another consideration would be whether you choose a ‘Testing Only’ or Testing & Consultancy’ sound testing company. Some companies provide cheap testing-only service, which typically means if your sound test fails they cannot help or need to call an acoustic consultant to redo the testing and provide design assistance to resolve the issue.
NOVA Acoustics offer cost-effective sound testing at rates competitive with ‘Testing Only’ sound testing companies. We are also acoustic consultants and will be there to help if you are unfortunate enough to fail your sound test.
With access a team of professional engineers, we offer a convenient yet effective service. So look no further and call NOVA the No.1 Sound Testing Company in the UK.
Where do We Provide Sound Testing Services?
Our nationwide team of sound testing engineers are here to support your building regulations sign off!
Whether you have a school in Yorkshire or London, student accommodation in Birmingham or Nottingham, an industrial premises in Cambridge or Manchester, a function room opening up in the North West or a manufacturing facility in Leicester or Newcastle… NOVA Acoustics Ltd are very well located throughout the UK to provide a cost-effective solution for your project. Give our acoustic consultants a call for an open and honest discussion about your project with at the most competitive price… wherever you are based.
Our team of sound testing engineers are strategically placed across the UK meaning we typically have an Acoustic Consultant within an hour’s drive of your project. Our Acoustic Consultants regularly travel for noise surveying and assessments, sound insulation testing and acoustic design projects, including major cities such as London, Birmingham, Nottingham, Newcastle, Cambridge, Manchester, Sheffield, Leeds, Hull and Liverpool.
Recent Projects
Acoustic consultancy for 70+ new build apartments in Bromley.
Noise Impact Assessments for TeesWorks 1GW/4GWh Battery Storage Project.