×
×
×

MuteClip® LP

MuteClip® LP for Part E Building Regulations Compliance

Achieving good levels of Sound Insulation to ensure you pass your sound test and achieve Part E compliance can seem a daunting task. We have put together a myriad of commonly used soundproofing wall and soundproofing floor solutions, with the simple aim of achieving passing your Part E sound test. We have selected a range of products which we have tested frequently and are confident in their onsite performance. So look no further your sound testing, acoustic design and product supplier is looking right at you.

MuteClip® LP (Low Profile) is a sound isolation clip that is unique in its design with its dual density rubber polymers, each carefully designed and assembled to improve noise reduction over a broad range of frequencies while remaining stable and consistent with every MuteClip® LP. 

The adopted low profile helps to reduce the loss of room height while maintaining the same performance as the standard MuteClip®, it is installed into the side of the joist so that it is only partially the depth of the MuteClip® Channel that protrudes. The MuteClip® LP systems look to minimise the points of contact with the joists while creating a system that is easy to install with little to no error due to the accomplished design. With these properties working in tandem, you will achieve excellent soundproofing against impact and airborne noise on a whole host of projects, all completed with swiftness and efficiency at an affordable price.

In scenarios where there is varying joist heights or two pre-existing rooms that have two different head heights, we would recommend the use of MuteClip® XP (Extended Profile).

Information

  • Dual density rubber acoustic clip.
  • Low profile design to reduce the loss of room height.
  • Dramatically reduces airborne and impact noise as a high performing, slimline acoustic system.
  • Can be used on metal, wooden, brick and concrete structures.
  • Reduced points of contact to help de-couple ceiling and wall systems.
  • A significant improvement over standard resilient bars in both performance and fitting
  • Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland) and Building Standards Technical Handbook 2017 for Scotland for impact transmission.

MuteClip® LP is part of the MuteRange core - these are products that been subjected to stringent testing in both laboratory and real-world environments providing the best possible solution for the purpose with a result you can trust.

£8.22

Standards

MuteClip® Ceiling Installation

With a ceiling configuration, we would recommend removal of the existing ceiling for a secure fit into the bottom of the joists.

Recommended Centre for MuteClip® on Timber Joist / Concrete Slab (CEILINGS ONLY)

MuteClip® Centres MuteClip® Channel Centres
0.4m (hitting each joist) 0.6m

*Standard joist centres of 0.4 centres

Sound Insulation Advice for Part E

Soundproofing Floors

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Walls

To help developers, architects and builders specify the correct products to achieve the...

Flanking Design & Detailing

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Suppliers

To ensure you achieve the requirements of Part E of the Building Regulations the materi...