Coronavirus Update - NOVA Acoustics Ltd remains open for business during this uncertain time following the COVID-19 outbreak.  All Government advice and recommendations are being followed by our staff and site engineers.  

×
×
×

Cellecta AH50 Acoustic Hangers

£0.00 (Including VAT)

We provide soundproofing products for trade accounts only with a minimum order value of £500 (ex VAT).

Why Choose Cellecta AH50 Acoustic Hangers

Compliance: Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland) and Building Standards Technical Handbook 2017 for Scotland for airborne and impact transmission.

Dimensions: 50mm Length

Installation:  Four fixing holes / 100 per box

Weight: 40 g / each

Where: wall and ceiling installation to separate building elements such as stud frames from the wall or floor joists.

A significant improvement over standard rigid MF ceilings in both performance and fitting.


Achieving good levels of Sound Insulation to ensure you pass your sound test and achieve Part E compliance can seem a daunting task. We have put together a myriad of commonly used soundproofing wall and soundproofing floor solutions, with the simple aim of achieving passing your Part E sound test. We have selected a range of products that we have tested frequently and are confident in their onsite performance. So look no further your sound testing, acoustic design, and product supplier is looking right at you.

Cellecta AH50 acoustic hangers are manufactured from high gauge galvanized steel and incorporate a resilient rubber grommet and integral washer. They can be used in conjunction with an MF Ceiling system or fixed to timber joists to increase the acoustic performance of a suspended ceiling.

Information

  • Outstanding acoustic performance
  • One size suits all applications
  • Made from high gauge galvanized steel
  • Robust Detail compliant component 
  • Easy to install


How to soundproof walls and ceilings

A combination of the following will always result in the best acoustic performance possible.

  • Mass: the addition of more substantial materials to reduce sound energy, for example, added layers of acoustic barrier combined with soundproof plasterboard.
  • Separation: breaking contact with the surface or surfaces through the use of acoustic isolation clips or stud framing.
  • Damping: the reduction of vibration through the use of flexible, damping materials such as Tecsound.

Cellecta AH50 acoustic hangers are the principal component that provides separation by decoupling from a vast range of surfaces and frameworks. By breaking contact with surfaces and creating an air gap, each Cellecta AH50 acoustic hangers give a significant improvement over directly fitted systems, for example, fitting Acoustic Plasterboard to the surface. 

Sound Insulation Advice for Part E

Soundproofing Floors

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Walls

To help developers, architects and builders specify the correct products to achieve the...

Flanking Design & Detailing

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Suppliers

To ensure you achieve the requirements of Part E of the Building Regulations the materi...