×
×
×

Isocheck 28T, 24T, 18T & 15T Acoustic Floating Floors

Achieve Part E Building Regulations compliance with our Acoustic Floating Floor Systems. See our Part E Sound Insulation Design Advice for more info.

We offer product supply to 'Trade Accounts' only. Contact us to setup a trade account.

Why Choose Isocheck 28T, 24T, 18T & 15T

Overall size: Isocheck 28T 2400mm x 600mm x 28mm | Isocheck 24T 2400mm x 600mm x 24mm |Isocheck 18T 2400mm x 600mm x 18mm | Isocheck 15T 1200mm x 600mm x 15mm

Resilient layer thickness: 6mm

Resilient layer: Recycled Isofiba

Weight: Isocheck 28T 23.0kg per sheet |Isocheck 24T 19.0kg per sheet|Isocheck 18T 13.0kg per sheet |Isocheck 15T 5.2kg per sheet

Compliance: Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland).*

Installation: Please see our installation tab below.



Achieving good levels of Sound Insulation to ensure you pass your sound test and achieve Part E compliance can seem a daunting task. We have put together a myriad of commonly used soundproofing wall and soundproofing floor solutions, with the simple aim of achieving passing your Part E sound test. We have selected a range of products which we have tested frequently and are confident in their onsite performance. So look no further your sound testing, acoustic design and product supplier is looking right at you.

Isocheck 28T, 24T, 18T & 15T are high performance acoustic floor systems designed to reduce impact sound transmission through traditional timber floors where no additional precautions are required for higher domestic loads in bathrooms and kitchens.

Isocheck 28T, 24T and 18T consist of a 6mm layer of Isofiba bonded to 22mm, 18mm or 12mm P5 V313 moisture resistant chipboard, whereas Isocheck 15T consists of a 6mm layer of Isofiba bonded to 9mm moisture resistant medium density fibreboard.

*When installed as part of an Isomass approved separating floor construction either system enables a traditional timber joisted floor to meet the sound transmission standards of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015."


Sound Insulation Advice for Part E

Soundproofing Floors

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Walls

To help developers, architects and builders specify the correct products to achieve the...

Flanking Design & Detailing

To help developers, architects and builders specify the correct products to achieve the...

Soundproofing Suppliers

To ensure you achieve the requirements of Part E of the Building Regulations the materi...